Re: Speed dial with a pause
Hello snoonan,welcome back to the Polycom Community.The process on how to do this is outlined on multiple occasions during this post and right before your reply.Please ensure to provide some feedback...
View ArticleCan I configure a VVX 300 to work with Ooma
I have a VVX 300 that I would like to configure as stanard phone for use with Ooma? Is this possible?
View ArticleRe: VVX 5.4.x Delay upgrade / prov.usercontrol
For completeness, This has been resolved.The issue on my side was ZTP.From talking with our polycom sales engineer:ZTP DOES NOT work with prov.userControl-- this IS stated in the admin guideZTP is...
View ArticleRe: prov.usercontrol.enabled is not working as expected in 5.3.3
I found a solution for my version of this issue, if it helps you:The issue on my side was ZTP.From talking with our polycom sales engineer:ZTP DOES NOT work with prov.userControl-- this is stated in...
View Article410 and 411 differences
So we are having an issue with star codes with the 411 series. We get everything to work on a 410. However when we get the 411 involved everything goes south fast. Is there a major difference between...
View ArticleRe: VVX 5.4.x Delay upgrade / prov.usercontrol
Hello Stephen,Great that Brad managed to get in touch with you. I already updated the below with the ZTP fact: Nov 24, 2014 Question:How can the Phone automatically check / poll for configuration...
View ArticleRe: 410 and 411 differences
Hello ABTTech,welcome to the Polycom Community.It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer...
View ArticleRe: VVX 5.4.x Delay upgrade / prov.usercontrol
Perfect, thanks!hoping that you can excuse my not finding that page -the subject of "Automatically check for configuration changes or new software versions" did not sound like it directly involved what...
View ArticleRe: Can I configure a VVX 300 to work with Ooma
Hello GPS Solutions,welcome to the Polycom Community.Does this service provider have a SIP setup where they share your user credentials with you?Please ensure to provide some feedback if this reply has...
View ArticleRe: Can I configure a VVX 300 to work with Ooma
It does not appear to be compatbe acoording to Ooma customer support
View ArticleRe: 410 and 411 differences
SteffenBaierUK wrote:Hello ABTTech, It would be great if you could provide some details on what is going wrong on your end.
View ArticleRe: 410 and 411 differences
When we go to park a call when typing in the *XX code it rings to busy. However on the 410 it parks the call. On the 411 if I just dial *xx it will give me the call parking option. But if I am on a...
View ArticleRe: Issues upgrading 501
Not being long enough? It says the same thing in your prior reply. XXXXXXXX is not present As far as seting up a local provisioning server, If you read my first entry, I've done that with 2 phones. A...
View ArticleRe: Issues upgrading 501
Could you go ahead with the next step as advised?Replied via a mobile device
View ArticleRe: 410 and 411 differences
Hello ABTTech,you may want to use a currently supported software like UC Software 5.5.1 or if you insist in the 5.4.x range use 5.4.5 instead. The next step after testing this would be opening a...
View ArticleRe: BLF Park orbit Broadsoft
There is no way. Since it does not seem possible to use Static BLF with broadsoft... you cannot modify the behavior of anything coming down on the ResourceList for Automata vs Normal. It's quite the...
View ArticleRe: BLF Park orbit Broadsoft
Hello ryanboyer,welcome to the Polycom Community.We have a serious commitment to our existing BroadSoft clients and any improvements or lack of feature parity simply need to be addressed the official...
View ArticleVVX 600 Dialer Digit Timer
I have a few VVX 600s and when you use the keypad on the physical phone for example you start typing a number 503-123 Pause for about 3 seconds or longer and the phone trys to dial that number when i...
View ArticleRe: SoundStation Duo 2.5mm port out to Chromebox for Meetings (Google...
Hello regexaurus,welcome to the Polycom Community.It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer...
View Article