SoundPoint 321 Vlan Weirdness
BACKGROUND INFO: Phone: SoundPoint 321UCS Ver: 4.0.11 Native Vlan: 1 (192.168.0.0/24) ifname=eth2Voice Vlan: 5 (192.168.5.0/24) ifname=eth2.5 isc DHCP server on both subnets option 128 defined as...
View ArticleRe: SoundPoint 321 Vlan Weirdness
Hello Chris_,welcome to the Polycom Community.We would need to see some phone logs and other things so please go ahead and raise this with your reseller.The phone is question was sold back in...
View ArticleRe: SoundPoint 321 Vlan Weirdness
>>SteffenBaierUK wrote:>>We would need to see some phone logs and other things so please go ahead and raise this with your reseller. I have the log level raised on the cfg log as well as...
View ArticleRe: SoundPoint 321 Vlan Weirdness
Hello Chris_,You are free to post within this community anything you want. In addition all community members or guests are free to respond to yourself. If a issue requires Polycom's attention to fix an...
View ArticleSoundstation 7000 reboot loop
I have a soundstation 7000 that when pluged into a POE source lights up, shows the polycom logo. then tunrs off and reboots. I have tried a couple poe switches and a dedicated poe injsector and all...
View ArticleRe: Soundstation 7000 reboot loop
Hello Guentha,welcome to the Polycom Community.Please post a serial number aka the MAC address of both devices so I can check this for you.Please ensure to provide some feedback if this reply has...
View ArticleRe: Soundstation 7000 reboot loop
Hello Guentha,This SSIP 7000 was sold by NEXTUSA back in 15/03/2011 and not knowing the circumstances or the environment it is hard to judge. The Unit needs to be RMA'ed which is not free as the unit...
View ArticleSoundpoint IP 2201 11601 001
My office has 6 of these phones and we are all having problems with our phones shutting of and restarting in the middle of calls. For me it happens when I dial out, i get about 2 minutes into the phone...
View ArticleRe: Soundpoint IP 2201 11601 001
Hello DMW,welcome to the Polycom Community.It is always useful to include the currently used SIP or UC Software version as issues experienced or a question asked may already be addressed in a newer...
View ArticleVVX D60 call forwarding
Pairing VVX D60 with a VVX500 or VVX600 removes the FORWARD ability. Unpairing restores the FORWARD feature. What's up with that??? In a related matter, Jabra and Plantronics work properly and are...
View ArticleRe: VVX D60 call forwarding
Hello dh911,welcome to the Polycom Community.It is always useful, and the minimum requirement to post, to include the currently used UC Software version as issues experienced or a question asked may...
View ArticleRe: VVX D60 call forwarding
I do not find your post helpful, and it does not answer my question, not going to mark it as an "Accepted Solution" and feel free to give me Kudos. So your only interests here are your Kudos? For...
View ArticleRe: VVX D60 call forwarding
Hello dh911,the "Read Me First" post ask's for anyone to post their currently used software versions. This is the minimal information needed. In your case you forgot to do so. In addition you did not...
View ArticleRe: VVX D60 call forwarding
You are everything I have come to expect from Polycom, whole lot of nothing. This junk is going back. Kudos!
View ArticleVVX 600 Home Screen as idle screen
Hello all Using a VVX 600, is there a way to make the Home Screen the idle screen? UC Software Version 4.1.6.5216 BootROM Software Version 5.1.6.4341
View ArticleCall pickup on the VVX410
We are using 8x8 for our cloud PABX with theVVX410 phones. When a call comes in, we pick up the phone to answer and it continues to ring. We have to dock the handset again and lift it before the call...
View ArticleRe: VVX 600 Home Screen as idle screen
Hello mezamesa,welcome to the Polycom Community. Firstly you should really upgrade to a currently supported software. This is at present UC Software 5.5.1 or UC Software 5.4.5The community's VoIP FAQ...
View ArticleRe: VVX 410 - Sipgate
I still cannot get the VVX 410 to register the line with sipgate.co.uk althogh I can do this on my Mac. Error log as below: 1221130234|sip |*|00|Sip UnRegister Usr:2460252e0 Dsp:sipgate.co.uk...
View ArticleClik here to view.
Re: VVX 410 - Sipgate
Hello 00,This must be a user error. 1221130234|sip |4|00|Registration failed User: 2460252eO, Error Code:401 Unauthorized I simply did this: and the phone registers: 1221132226|sip |0|00| REGISTER...
View Article