Quantcast
Channel: All VoIP / SIP Phones posts
Browsing all 13863 articles
Browse latest View live

Re: EAP-TLS and Polycom VVX

You can use the MIC but the server EAP certificate needs to be issued by one of the CA’s on this list below, the polycom device root certificates also need to be trusted on the radius...

View Article


Re: Slow network on vvx

Hello all,This was addressed via: Fixed via VOIP-117141 Phones now throughput's at the rate of the speed of LAN when the PC is connected to the PC port of the phoneAbove was addressed using 5.4.5 and...

View Article


Polycom 330 won't reset from factory silent mode

We have Polycom 330 phones with the following configuration: SIP Version 3.0.4.0061P/N 3150-11530-304File: sip.ldModel: Soundpoint Ip 330 SIPBicom sip Version: 3.1.9.3 bicom pbxware  sip When I set the...

View Article

Re: Polycom 330 won't reset from factory silent mode

Hello neillundgren,welcome back to the Polycom Community.What about your other post => here<= ? The SoundPoint IP 320/330 was being discontinued and was no longer available for purchase after...

View Article

Polycom VVX Dialing ** Off Hook

Hello, I'm wondering if you can change the off hook behavior of dialing * in the config file.  The default gives you and option to dial * twice to enter a + sign. Can I disable this behavior?    Thanks,  

View Article


Re: Polycom VVX Dialing ** Off Hook

Hello Mwilliams,welcome to the Polycom Community.It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer...

View Article

Re: Polycom VVX Dialing ** Off Hook

Hello, This is SIP firmware 5.3 on a VVX 400. This doesn't seem to be a digit map issue as I can dial **.  The problem is that the * key brings up the option to dial a + sign if you dial it twice. You...

View Article

Re: Polycom VVX Dialing ** Off Hook

Hello Mwilliams,anything 5.3.x is old and unsupported. Please update to a current software like 5.5.0 or at least to 5.4.5 In addition you can use: call.internationalDialing.enabled Use this parameter...

View Article


Re: Polycom VVX Dialing ** Off Hook

This is the config parameter I was looking for. Works perfectly.    Thanks!

View Article


How to define/setup the number a receiver of a call from a polycom 33x phone

HiIs there a way to define the number that is shown on a recievers phone? I am employed in a company with several different departments, and we want the phones in a specific department to show the...

View Article

Re: How to define/setup the number a receiver of a call from a polycom 33x phone

Hello Per Krog,welcome to the Polycom Community.It is always useful to include the currently used SIP or UC Software version as issues experienced or a question asked may already be addressed in a...

View Article

Re: How to define/setup the number a receiver of a call from a polycom 33x phone

I am only enduser and therefore I do not know much about the system setup.Here is some additionel informations:SIP version 3.3.3.0069P/N 3150-11530-333 Phone model: Soundpoint IP 335Assembly:...

View Article

Re: How to define/setup the number a receiver of a call from a polycom 33x phone

Hello Per Krog,UC Software 3.3.3 is no longer supported and has been replaced with UC Software 4.0.11 but I suggest you work with whoever installed this in your organisation.Best RegardsSteffen...

View Article


VVX 400 PSTN how to?

Hi,This forum seems mostly about the Soundstation but I want to set up a PSTN line on a VVX 400 somehow. Does anyone know what equipment I need to be able to do this? Is it even possible? Thank you  

View Article

VVX 400 - how to navigate to next page of lines?

Hi,I have a VVX 400 which I've configured 14 lines on. The first page of 12 lines I can see and access with the line key buttons. How can I navigate to the next page to see the other two lines I have...

View Article


Re: VVX 400 PSTN how to?

Hello Samuurai,welcome to the Polycom Community.The VVX is a VoIP phone so you need a service that translates VoIP to PSTN. You can get cards that work with Asterisk as an example that can terminate a...

View Article

Re: VVX 400 - how to navigate to next page of lines?

Hello Samuurai,welcome to the Polycom Community.It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer...

View Article


Re: VVX 400 - how to navigate to next page of lines?

Thanks. So there's no way to press "next page" at all? It seems like such a simple feature!  

View Article

Re: VVX 400 - how to navigate to next page of lines?

Hello Samuurai,no there is not.Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.Best RegardsSteffen BaierPolycom Global Services

View Article

Re: VVX 400 - how to navigate to next page of lines?

Sneaky! ok, thanks for clarifying. That answers my question.

View Article
Browsing all 13863 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>