Re: Polycom vvx 400 not registerd on SIP TLS
Hello Nick,welcome to the Polycom Community.The community's VoIP FAQ contains this post here:Apr 17, 2013 Question: How can I setup a TLS connection for SIP signaling and / or troubleshoot...
View ArticleRe: Disable or remove the DND Softkey
Hello RIch-Telegia,welcome to the Polycom Community.I have never heard of this and it would be of interest what Software version this happens.Please ensure to provide some feedback if this reply has...
View ArticleExchange URL warning after new update
I updated to 5.5.1.11526 yesterday and now I am seeing an alert on the top-right of my VVX 400 screen. The alert is "exchange url not configured" I'm not wanting to use Exchange and it's completely...
View ArticleRe: Exchange URL warning after new update
You're not alone... you can clear it from the Settings -> Status -> Warnings menu, howerver, it will most likely show back up after a reboot.
View ArticleRe: Exchange URL warning after new update
Hello all,welcome to the Polycom Community.Could you try: <test feature.EWSAutodiscover.enabled="0" feature.exchangeCalendar.enabled="0" />Please ensure to provide some feedback if this reply has...
View ArticleRe: Exchange URL warning after new update
Steffen,Good stuff, thanks for the quick reply on this.
View ArticleIP7000 Firmware
HICan some help please?We have a Ip7000 that is coming up with a FTP error but is working correctly. The problem the client does not allow internet connection and we dont know how to get rid of this...
View ArticleRe: IP7000 Firmware
Hello Daryl,welcome to the Polycom Community.It is always useful to include the currently used SIP or UC Software version as issues experienced or a question asked may already be addressed in a newer...
View ArticleRe: Exchange URL warning after new update
Steffen,I have applied this configuration and have confirmed that these services are indeed disabled (checked status in the web interface) but the warning is still displayed after each reboot.
View ArticleRe: Exchange URL warning after new update
Hello cwallace-ena,so you are still seeing the triangle after rebooting and the message in the diagnostic menu? I would open a support ticket.In order to raise a support ticket you need to work with...
View ArticleRe: Exchange URL warning after new update
Will do, jsut wanted to provide initial feedback for those that were following. Thanks Steffen!
View ArticleRe: Provisioned phone resets if DHCP isn't broadcasting
Hello John,welcome back to the Polycom Community.It is always useful to include the currently used SIP or UC Software version as issues experienced or a question asked may already be addressed in a...
View ArticleCan't set default ringtone via provisioning
Hello, I have a VVX410 running the current software: 5.5.1.11526 and It seems I can't manage to get it to set the default ring tone via provisioning. <regreg.{$line}.ringType="ringer10" /> I am...
View ArticleRe: Can't set default ringtone via provisioning
Hello Julien,The Parameter is:reg.x.ringTypeX reflects on the line so in case you want line 2 it would be: reg.2.ringType="ringer10"For any follow up question please consult page 93 of the UC Admin...
View ArticleIP7000 autoanswer
Dear all, How must I set IP7000 (UC SW 4.0.11) to autoanswer call from one or all internal station(s)?I use PBX which does not support Alert info. Andrej
View ArticleRe: Telephony Event Notification
I updated the test phone toUC Software Version 5.5.1.11526Updater Version 5.7.1.13261 Now the logs show|wmgr |4|00|Unable to send notification to https://IPADDRESS/api/TestHangup.aspx with error 35...
View ArticleRe: Disable server certificate verification for TLS
Hi, I have the same issue with Polycom VVX 400.If anyoane could tell me how to bypass CA certificate verification that would be very nice. Thank you,Nick
View ArticleRe: Disable server certificate verification for TLS
Hello Nick,Could you respond to the log request in your other two replies? Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.Best...
View ArticleRe: disable Directed Call Pickup for BLF
Polycom's response does not seem to address the first part of the original request: " Is there a way to disable the Directed Call Pickup feature when using BLF? " I have found...
View ArticleRe: Self signed cert for provisioning VVX 410
Hi Steffen, That help because I could see more log messages, but my phone is still unregistered.If you can take a look on these: 231037|sip |2|00|new UA Client Non-INVITE trans state 'callingTrying',...
View Article