Re: vvx1500 stuck at banner on startup
That's it , it was on 5.02. and apparently found a newer sip.ld, from the boot.log -000008.842|so |3|01|Platform: BootBlock=2.9.0 (17960-001) 22-Oct-09 16:33 000008.842|so |3|01|Application, main:...
View ArticleRe: vvx1500 stuck at banner on startup
Hello Jed,5.2.2 is the Updater / BootROM coming with the 5.0.2 release. I assume someone looking after your infrastructure added a new Software on the provisioning server without reading the notice and...
View ArticleVVX410 No Sound for 6 Seconds when both parties using Speakerphone
Was hoping someone on here may have seen an issue like this. We're using a hosted PBX Service and have deployed VVX410's with firmware version 5.0.0.6874 (firmware is controlled by our vendor). We're...
View ArticleRe: Polycom paging vs Group Paging and other paging solutions
Thanks for response.I meant Group Paging service - it actually sends multicast to speakerphones, but consumes plenty of traffic. What would be the benefit of using a dedicated hardware + phones for...
View ArticleShow MAC address in HTTP_USER_AGENT header
Currently have both these are set for a Polycom VVX 600: device.prov.tagSerialNo="1" device.prov.tagSerialNo.set="1"Which, according to the admin guide, should show the MAC address in the user agent...
View ArticleRe: Show MAC address in HTTP_USER_AGENT header
Hello TweedleChicken,welcome to the Polycom Community.The community's VoIP FAQ contains this post here: Jul 25, 2013 Question: How can I setup certain Device parameters on my phone via a configuration...
View ArticleRe: Headset not hanging up
Hello all, Let me try to elaborate this with a different example: A car manufacturer does (usually) not sell directly to the people using their carsA car manufacturer sells their cars via car...
View ArticleRe: Show MAC address in HTTP_USER_AGENT header
Hi, thanks for your responce.I have set the parameters corectly and I can verify on the phone that the Tag SN to UA setting is enabled, however it still does not show the MAC address in the header.
View ArticleSoundPoint IP 331 network link is down
Hi I have Polycom IP 331, I can able to log in to a web browser using IP address. It can receive calls but cant dial out. When trying to dial out it gives error message saying network link down ... no...
View ArticleRe: Hotdesking VVX Keeps previous DND status when logging off and logging on
Hi, could you please confirm what the solution is for this? thanks, Kind regards,Leo
View ArticleRe: SoundPoint IP 331 network link is down
Hello koshi_pls,welcome to the Polycom Community.It is always useful to include the currently used SIP or UC Software version as issues experienced may already be addressed in a newer release. Please...
View ArticleRe: Hotdesking VVX Keeps previous DND status when logging off and logging on
Hello Leo,I briefly replicated this internally and can verify that I believe I can reproduce the same. I have opened an internal ticket but in order to get a customer affected issue raised you would...
View ArticleClik here to view.
Re: Show MAC address in HTTP_USER_AGENT header
Hello TweedleChicken,Did you reboot / restart the unit after setting this via the Web Gui? Above is a quick test I did. Only the GET method used by the phone to download it's Firmware appends the MAC...
View ArticleRe: Call on hold will drop at 30 seconds.
We're having the exact same issue. We're running VVX 500's running 5.4.0A.10182.
View Articlecalls.xml limit
Is there a way to increase the call log (in the .xml file) beyond 100 total calls? If not, is there a way for the phone to start a new .xml file each day or week?
View ArticleRe: Hotdesking VVX Keeps previous DND status when logging off and logging on
Hi Thank you, We have various suppliers apparently, usually we buy these from VCom. But to give you the MAC address of a VVX201: 64167F803BA2 Thanks, Kind regards,Leo
View ArticleRe: calls.xml limit
Hello ChevyTruck,welcome to the Polycom Community.I have moved this post from the unrelated post => here<= The limit is documented in the admin guide and a feature request would be required to...
View ArticleRe: Hotdesking VVX Keeps previous DND status when logging off and logging on
Hello Leo,This was sold via Siphon Networks Ltd but I believe VCom has raised cases with us in the past. Can you go ahead and work with them and quote 1-1995497228 / VESC-6026 so it can be directly...
View ArticleRe: Hotdesking VVX Keeps previous DND status when logging off and logging on
Thank you Steffen, I will do that.
View ArticleIs there any way to get corporate directory in polycom cx 5500
We are using CUCM 10.5(2) and one cx 5500 is registered as SIP end point. Is there any way to pull our corp directory from this phone? I mean pull from ldap or any way to import/export contacts...
View Article
